About The Serial Ports - Sun Microsystems Sun Fire V445 Server Administration Manual

About the Serial Ports

The default console connection to the Sun Fire V445 server is through the RJ-45 serial
management port (labeled SERIAL MGT) on the back panel of the ALOM system
controller card. This port operates only at 9600 baud.
Note – The serial management port is not a standard serial port. For a standard and
POSIX compliant serial port, use the DB-9 port on the system back panel, which
corresponds to TTYB.
The system also provides a standard serial communication port through a DB-9 port
(labeled TTYB) located on the back panel.This port corresponds to TTYB, and
supports baud rates of 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, 9600,
19200, 38400, 57600, 115200, 153600, 230400, 307200, and 460800. The port is
accessible by connecting a serial cable to the back panel serial port connector.
For the serial port location, see "Locating Back Panel Features" on page 16. Also see
"Reference for the Serial Port Connector" on page 238. For more information about
the serial management port, see Chapter 2.
96 Sun Fire V445 Server Administration Guide • September 2007