OpenBoot PROM Enhancements for
Diagnostic Operation
This section describes the diagnostic operation enhancements provided by OpenBoot
PROM Version 4.15 and later and presents information about how to use the
resulting new operational features. Note that the behavior of certain operational
features on your system might differ from the behavior described in this section.
What's New in Diagnostic Operation
The following features are the diagnostic operation enhancements:
New and redefined configuration variables simplify diagnostic controls and allow
you to customize a "normal mode" of diagnostic operation for your environment.
See
New standard (default) configuration enables and runs diagnostics and enables
Automatic System Restoration (ASR) capabilities at power-on and after error reset
events. See
Service mode establishes a Sun prescribed methodology for isolating and
diagnosing problems. See
The post command executes the power-on self-test (POST) and provides options
that enable you to specify the level of diagnostic testing and verbosity of
diagnostic output. See
About the New and Redefined Configuration
Variables
New and redefined configuration variables simplify diagnostic operation and
provide you with more control over the amount of diagnostic output. The following
list summarizes the configuration variable changes. See
descriptions of the variables.
New variables:
Redefined variable:
158
Sun Fire V445 Server Administration Guide • September 2007
"About the New and Redefined Configuration Variables" on page
"About the Default Configuration" on page
"About the post Command" on page
service-mode? – Diagnostics are executed at a Sun-prescribed level.
diag-trigger – Replaces and consolidates the functions of post-trigger
and obdiag-trigger.
verbosity – Controls the amount and detail of firmware output.
"About Service Mode" on page
158.
159.
162.
165.
for complete
TABLE 8-7
Need help?
Do you have a question about the Sun Fire V445 Server and is the answer not in the manual?
Questions and answers