Controlling The Locator Indicator; To Control The Locator Indicator - Sun Microsystems Sun Fire V445 Server Administration Manual

Note – Some environmental information might not be available when the server is
in Standby mode.
Note – You do not need ALOM system controller user permissions to use this
command.

Controlling the Locator Indicator

The Locator indicator locates the server in a data center or lab. When the Locator
indicator is enabled, the white Locator indicator flashes.You can control the Locator
indicator either from the Solaris command prompt or from the sc> prompt. You can
also reset the Locator indicator with the Locator indicator button.

To Control the Locator Indicator

1. To turn on the Locator indicator, do one of the following:
In the Solaris OS, log in as superuser and type:
TABLE 5-6
# /usr/sbin/locator -n
Locator LED is on.
From the ALOM system controller command prompt, type:
TABLE 5-7
sc> locator on
Locator LED is on.
2. To turn off the Locator indicator, do one of the following:
In Solaris, log in as root and type:
TABLE 5-8
# /usr/sbin/locator -f
Locator LED is off.
108 Sun Fire V445 Server Administration Guide • September 2007