Sun Microsystems Sun Fire V445 Server Administration Manual page 6

Accessing the System Console With an Alphanumeric Terminal 53
Verifying Serial Port Settings on TTYB 55
Accessing the System Console With a Local Graphics Monitor 56
Reference for System Console OpenBoot Configuration Variable Settings 59
3. Powering On and Powering Off the System 61
Before You Begin 61
Powering On the Server Remotely 62
Powering On the Server Locally 63
Powering Off the System Remotely 64
Powering Off the Server Locally 66
Initiating a Reconfiguration Boot 66
Selecting a Boot Device 69
4. Configuring Hardware 73
About the CPU/Memory Modules 73
vi Sun Fire V445 Server Administration Guide • September 2007
To Access the System Console With an Alphanumeric Terminal Through
the Serial Management Port 53
To Access the System Console With an Alphanumeric Terminal Through
the TTYB Port 54
To Verify Serial Port Settings on TTYB 55
To Access the System Console With a Local Graphics Monitor 56
To Power On the Server Remotely 62
To Power On the Server Locally 63
To Power Off the System Remotely From the ok Prompt 65
To Power Off the System Remotely From the ALOM System Controller
Prompt 65
To Power Off the Server Locally 66
To Initiate a Reconfiguration Boot 67
To Select a Boot Device 70