Basic Alom Functions; To Switch To The Alom Prompt; To Switch To The Server Console Prompt - Sun Microsystems Sun Fire V445 Server Administration Manual

Basic ALOM Functions

This section covers some basic ALOM functions. For comprehensive documentation,
refer to the ALOM Online Help.

To Switch to the ALOM Prompt

Type the default keystroke sequence:
TABLE 8-3
# #.
Note – When you switch to the ALOM prompt, you will be logged in with the
userid admin. See

To Switch to the Server Console Prompt

Type:
TABLE 8-4
sc> console
More than one ALOM user can be connected to the server console stream at a time,
but only one user is permitted to type input characters to the console.
If another user is logged on and has write capability, you will see the message below
after issuing the console command:
TABLE 8-5
sc> Console session already in use. [view mode]
To take console write capability away from another user, type:
TABLE 8-6
sc>
156 Sun Fire V445 Server Administration Guide • September 2007
"Setting the admin Password for ALOM" on page
console -f
155.