Table 1-1 Sun Fire V445 Server Features At A Glance - Sun Microsystems Sun Fire V445 Server Administration Manual

System reliability, availability, and serviceability (RAS) are enhanced by features that
include hot-pluggable disk drives and redundant, hot-swappable power supplies
and fan trays. RAS features are described in
The system, which is mountable in a 4-post rack, measures 6.85 inches high (4 rack
units - U), 17.48 inches wide, and 25 inches deep (17.5 cm x 44.5 cm x 64.4 cm). The
system weighs approximately 75 lb (34.02 kg). Robust remote access is provided
with Advanced Lights Out Manager (ALOM) software, which also controls
powering on/off and diagnostics. The system also meets ROHS requirements.
TABLE 1-1
details on these features are provided in the following subsections.
TABLE 1-1
Feature
Processor
Memory
External ports
Internal hard drives
Other internal
peripherals
PCI interfaces
Power
Cooling
2 Sun Fire V445 Server Administration Guide • September 2007
provides a brief description of the Sun Fire V445 server features. More
Sun Fire V445 Server Features at a Glance
Description
4 UltraSPARC IIIi CPUs
16 slots that can be populated with one of the following types of
DDR1 DIMMS:
• 512 MB (8 GB maximum)
• 1 GB (16 GB maximum)
• 2 GB (32 GB maximum)
• 4 Gigabit Ethernet ports – Support several modes of operations at
10, 100, and 1000 megabits per second (Mbps)
• 1 10BASE-T network management port – Reserved for the ALOM
system controller and the system console
• 2 Serial ports – One POSIX compliant DB-9 connector, and one RJ-
45 serial management connector on the ALOM system controller
card
• 4 USB ports – USB 2.0 compliant and support 480 Mbps, 12 Mbps,
and 1.5 Mbps speeds
8 2.5 inch (5.1 cm) high, hot-pluggable Serial Attached SCSI (SAS)
disk drives
1 DVD/ROM/RW device
8 PCI slots: four 8 lane PCIe slots (2 of which also support 16 lane
form factor cards) and 4 PCI-X slots
4 550-watt hot-swappable power supplies, each with its own cooling
fan
6 hot-swappable high-power fan trays (one fan per tray) organized
into three redundant pairs – 1 redundant pair for disk drives – 2
redundant pairs for the CPU/memory modules, memory DIMMs,
I/O subsystem, and front-to-rear cooling of the system
Chapter 5.