To Run Solaris System Information Commands - Sun Microsystems Sun Fire V445 Server Administration Manual

When used with the -p option, this command displays installed patches.
shows a partial sample output from the showrev command with the -p option.
TABLE 8-30
Patch: 109729-01 Obsoletes:
Patch: 109783-01 Obsoletes:
Patch: 109807-01 Obsoletes:
Patch: 109809-01 Obsoletes:
Patch: 110905-01 Obsoletes:
Patch: 110910-01 Obsoletes:
Patch: 110914-01 Obsoletes:
Patch: 108964-04 Obsoletes:

To Run Solaris System Information Commands

1. Decide what kind of system information you want to display.
For more information, see
2. Type the appropriate command at a console prompt.
See
TABLE 8-31
TABLE 8-31
Command
fmadm
fmdump
prtconf
prtdiag
prtfru
psrinfo
showrev
showrev -p Command Output
Requires:
Requires:
Requires:
Requires:
Requires:
Requires:
Requires:
Requires:
"Solaris System Information Commands" on page
for a summary of the commands.
Using Solaris Information Display Commands
What It Displays
Fault management information
Fault management information
System configuration information /usr/sbin/prtconf
Diagnostic and configuration
information
FRU hierarchy and SEEPROM
memory contents
Date and time each CPU came
online; processor clock speed
Hardware and software revision
information
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsr
What to Type
/usr/sbin/fmadm
/usr/sbin/fmdump
/usr/platform/sun4u/sbi
n/prtdiag
/usr/sbin/prtfru
/usr/sbin/psrinfo
/usr/bin/showrev
Chapter 8 Diagnostics
TABLE 8-30
192.
Notes
Lists information and
changes settings.
Use the -v option for
additional detail.
–
Use the -v option for
additional detail.
Use the -l option to d
hierarchy. Use the -c
to display SEEPROM
Use the -v option to o
clock speed and other
Use the -p option to s
software patches.
203