System Controller Ports; Network Management Port; Figure 1-10 Network And Serial Management Port Locations; Table 1-4 Network Management Port Indicator - Sun Microsystems Sun Fire V445 Administration Manual

System Controller Ports

There are two system controller ports. Both use an RJ-45 connector.
FIGURE 1-10

Network Management Port

This port provides direct network access to the ALOM system controller, when
configured, and can access the ALOM prompt and system console output.
Note – The system controller is accessed through the serial management port by
default. You must reconfigure the system controller to use the network management
port. See
The network management port has a Link indicator that operates as described in
TABLE 1-4
TABLE 1-4
Name
Link
18 Sun Fire V445 Server Administration Guide • August 2006
Network management port
(NET MGT)
Network and Serial Management Port Locations
"Activating the Network Management Port" on page
.
Network Management Port Indicator
Description
This green indicator is lit when an Ethernet connection is
present.
Serial management port
(SER MGT)
40.