Table of Contents
Advertisement
N
W
4.
ET
ARE
X AND
Using NWADMIN or NWADMN32
This process involves the following tasks.
•
Attaching the printer server
•
Installing the printer driver
•
Configuring the printer
Attaching the Printer Server
note:
Before loging onto the server, you must install
IntranetWare Client 2.2 or later. Refer to Novel
documentation for instructions on how to install the
client.
To attach the print server:
1. Log in to NetWare 4.x with administrator rights and
open the NetWare Administrator window.
2. Create Printer Object.
a. Highlight the Organizational Unit or Organization
where you want to create the print service in the
Directory Tree. From the Object menu, select Create .
b. In the New Object window that appears, scroll down
the Class of New Object list, select the Printer icon
and click the OK button.
c.
When the Create Printer window appears, type a
name in the Printer Name field and click on the
Create button.
3. Create Print Server Object.
a. Highlight the Organizational Unit. From the Object
menu, select Create .
b. In the New Object window appears, scroll down the
Class of New Object list, select the Print Server
icon, and click the OK button.
c. At the Create Print Server window, type a name in
the Print Server Name field and click the Create
button.
note:
The Print Server name you enter should match
the name shown on the Network Settings page under
Novell Network Information.
5.
X
4.
Create Print Queue Object.
a. Highlight the Organizational Unit. From the Object
menu, select Create .
b. In the New Object window that appears, scroll down
the Class of New Object list, select the Print
Queue icon, and click the OK button.
c. At the Create Print Queue window, click the
Directory Service Queue button, then type in a
name for Print Queue Name .
d. Click the icon to the right of Print Queue Volume
field to display the browser, and select a specific
Print Queue Volume (or type the name in the field).
e.
Click the Create button.
5.
Assign Printer Object
a. In the Directory Tree, double click on the printer
object just created to open its Printer window. Click
on the Assignments button on the right-side of the
window and click on the Add button.
b. In the Select Object window that appears, find the
print queue object just created among the choices
listed in the Objects box and select it by clicking on it.
c.
Click on the OK button and the print queue is added
to the Print Queues: box in the Printer: window.
Click on the OK button again.
6.
Assign Print Server Object
a. In the Directory Tree, double-click on the print server
object you just created to open its Print Server
window.
b. In the Print Server window that appears, click on
the Assignments button and Add button to bring
up the Select Object window. Select the printer
object just created from the Objects box and click on
the OK button. Now the printer (with its context)
appears in the Printers: box of the Print Server
window. Click on the OK button.
7. Check Assignments
a. At the Directory Tree , double click on the Print
Queue object you just created. At the Print Queue
NetWare 4.x and 5.x
69
Advertisement
Table of Contents
Troubleshooting
