User Interface; Embossed Template; Error Conditions And Corrective; Print Head Replacement - NEC SuperScript 100C User Manual

User Interface

Embossed Template

On the inside of the top cover of the printer, there is an embossed template. This
template illustrates the operating procedure for changing the print head and how
to adjust the print head position if you wish to print on envelopes. It also
indicates four error conditions.
Error conditions and corrective action
The four error conditions are:
1. CHECK PAPER
There is no paper in the ASF, or there is a paper jam.
paper
loading procedure and Chapter 5 for information on how to clear paper jams.
2. CHANGE BLACK/COLOR SWITCH POSITION
The position of the print head selection lever is not compatible with the type
of
print head you have inserted. See Chapter 2 for information on the use of the
print
head selection lever.
3. CHANGE INK CARTRIDGE
The print head (ink cartridge) requires replacing.
See Chapter 2 - Replacing the Print Head.
4. CHANGE PRINT HEAD
There is no print head in the printer, the type of print head you have inserted
is not
compatible with the printer driver selected, or the Install Cartridge key has
been
pressed. See Chapter 4 for information on monochrome/color printer drivers.
If one of these error conditions occurs, any printer operation is interrupted, the
On Line and Power LED's start to flash and the print head carriage is positioned
to indicate the action required.
If there is no operator intervention within 60 seconds(with a monochrome print
head inserted) of the error being signaled, the print head carriage returns to its
rest position. To return the print head carriage to the error indication, press
Install Cartridge.
* 30 seconds, if you are using a color print head
** The print head carriage will not return to its rest position if there is no
print head inserted or if the print head selection lever is not in the correct
position.
Once you have corrected the error condition, press Install Cartridge to return the
print head carriage to its rest position, so that the printer can resume
operating.
Further information regarding these and other types of operating errors is
available in Chapter 5 - Troubleshooting.

Print head replacement

This part of the template illustrates the print head/ink cartridge replacement
procedure. It is complementary to the description in the corresponding sections in
Chapter 2.

Print head adjustment

This part of the template illustrates the adjustment switch, depending on the type
of document you are using
See Chapter 3 for the