Electrical Drawing Designations - Toro Reelmaster 5010- H Service Manual

Electrical Drawing Designations

The following abbreviations are used for wire harness
colors on the electrical schematics and wire harness
drawings in this chapter.
ABBREVIATION
BK
BR or BN
BU
GN
GY
OR
PK
R or RD
T
VIO
W or WH
Y or YE
Numerous harness wires used on Reelmaster ma-
chines include a line with an alternate color. These wires
are identified with the wire color and line color with either
a / or _ separating the color abbreviations listed above
(e.g. R/BK is a red wire with a black line, OR_BK is an
orange wire with a black line).
NOTE: The electrical harness drawings in this chapter
identify both the wire color and the wire gauge. For ex-
ample, 16 BK on a harness diagram identifies a 16
gauge wire that has a black insulator.
NOTE: A splice used in a wire harness will be identified
on the wire harness diagram by SP. The manufacturing
number of the splice is also identified on the wire har-
ness diagram (e.g. SP01 is splice number 1).
Foldout Drawings
COLOR
BLACK
BROWN
BLUE
GREEN
GRAY
ORANGE
PINK
RED
TAN
VIOLET
WHITE
YELLOW
Page 9 - 2 Reelmaster 5010- H