Toro Reelmaster 5010- H Service Manual page 149

Battery Hydrometer
Use the battery hydrometer when measuring specific
gravity of battery electrolyte in the machine 12 VDC bat-
tery. Obtain this tool locally.
NOTE: A battery hydrometer is not usable for the bat-
teries in the Reelmaster 5010- H 48 VDC battery sys-
tem. These batteries are valve regulated, sealed lead
acid batteries that are maintenance free with no provi-
sion for checking or adjusting electrolyte level.
Figure 10
Plastic Plug
Toro Part Number: 2410- 30 (for 5 inch reels)
94- 2703 (for 7 inch reels)
This cap is used for placement into the cutting unit side
plate when the cutting reel motor is removed. It prevents
dirt and debris from entering the cutting reel bearing
area.
Figure 11
Reelmaster 5010- H Page 5 - 9 Electrical System