8. Connect air cleaner and motor/generator intake
hoses to fan shroud and secure with hose clamps (Fig.
9). Torque hose clamps from 30 to 40 in- lb (3.4 to 4.5
N- m).
9. Make sure radiator draincock is closed (threaded out
fully).
10.Fill radiator and coolant reservoir with coolant.
11. Lower and secure hood.
Kubota Diesel Engine
12.Carefully position and install oil cooler to radiator
frame. Rotate clamps to secure oil cooler to radiator
frame.
13.Install 12 volt battery (see 12 VDC Battery Service
in the Service and Repairs section of Chapter 5 - Electri-
cal System).
14.Install and latch rear screen.
Page 3 - 12
Reelmaster 5010- H