Toro Reelmaster 5010- H Service Manual page 159

Advisory
Number
160 Start Denied
161 Mow Denied
162 Lowered Denied
163 Backlap Denied
169 Engine Shutdown
170 Recycle Keyswitch (ignition switch)
173 Master Address Claim
175 Check Reel Speed Settings
176 Reel Speed Changed
177 Reel Speed Changed Out Of Range
178 Low 48 VDC Battery
Reelmaster 5010- H
Advisory Description
Page 5 - 19
Possible Reason for Advisory
Neither seat occupied nor parking brake
applied
Traction pedal is NOT in neutral position
Wait to start until system functions have been
initialized
Joystick is in RAISE position
Joystick is in LOWER position
Reel engage/disengage switch is in engaged
position
No operator in seat
Engine coolant temperature is excessive
Low voltage in 48 VDC battery pack
Mow stop lever is in TRANSPORT position
Traction pedal is not in neutral position
Mow stop lever is in TRANSPORT position
Engine coolant temperature is excessive
Parking brake is NOT applied
Reel engage/disengage switch is NOT in
engaged position
Cutting units are NOT fully lowered
No operator in seat
Parking brake IS applied
Engine coolant temperature is excessive
Engine oil pressure is low
Engine starter motor has been engaged for 30
seconds
Check that reel speed settings are correct for
cutting units on machine
Identifies that reel speed has been changed
Heavy 48 VDC battery pack use has
decreased battery pack charge
Electrical System