DE2 24C
After you install and route the cables through the assembly, attach the hook and loop straps (1)
5
to secure the cables. Then attach the right and left outer latches to support the assembly.
DE2 24C
Precautions
Observe the following cautions when installing the Oracle Storage Drive Enclosure DE2-24C
into a rack using the supplied rail kit. Note that if your rail kit shipped with installation
instructions, use those instructions instead.
Always load equipment into a rack from the bottom up so that it will not become top-heavy
■
and tip over. Deploy the anti-tip bar to prevent the rack from tipping during equipment
installation.
Ensure that the temperature in the rack does not exceed the controller's maximum ambient
■
rated temperatures. Consider the total airflow requirements of all equipment installed in the
rack to ensure that the equipment is operated within its specified temperature range.
Do not remove a component if you do not have an immediate replacement. The disk shelf
■
must not be operated without all components in place.
118
Oracle ZFS Storage Appliance Installation Guide • January 2014 E48491–02