Table of Contents
Advertisement
Figure Legend
1 Connector A
2 Front slide bar
3 Velcro straps (6) 8 Rear slide bar
4 Connector B
5 Connector C
Attached Storage
The ZS3-2 controller connects to external storage through a 4-port (4x4 SAS-2) 6Gb/s HBA.
You can attach from one to eight HDD-only or SSD/HDD Logzilla-capable disk shelves to the
controller. You can also attach mixed disk shelf types (DE2 and Sun Disk Shelf) in the same
chain. For more information, see
ZS3-4
ZS3-4 Hardware Overview
Use the information on this page as a preparation reference for servicing replaceable
components of the Oracle ZFS Storage ZS3-4 controller. Refer to the following topics for
procedural instructions:
■
■
Controller Overview
The ZS3-4 controller can be configured as a single controller or two controllers to create a
high-availability cluster configuration. The following table describes the configuration options:
Mktg Part
Number
7105725 4x10-core,
Chapter 1 • Introduction
6 Connector D
7 Slide-rail latching bracket (used with connector D)
9 Cable covers
Controller Tasks - replace system controller components
Disk Shelf Tasks - replace disk shelf components
CPU
Memory
1TB (16GB
2.40GHz
DIMMs)
Connecting to Attached
Readzilla SAS-2
Boot Drive SAS-2
Four 1.6TB
Two 900GB
Storage.
Software
HBA SAS-2
Version (min)
4X4-port
2013.1.0
ZS3-4
25
Advertisement
Table of Contents
