Table of Contents
Advertisement
ZS3-2
Connection Type
10 Gigabit
Ethernet
Cluster I/O Ports
Two cluster serial ports (0 and 1) and one Ethernet port provide communication between two
controllers to form a cluster configuration. For information about how to connect cables to
form a cluster, see the Cluster configuration topic.
Removing RJ-45 Cables from Cluster Serial Ports
CAUTION: When disconnecting an RJ-45 cable from a cluster serial port (0 and 1), use extreme
care not to damage the internal RJ-45 receptacle. To properly remove an RJ-45 cable from a
cluster serial port, do the following:
1. Using your index finger, press down fully on the RJ-45 release tab.
Be sure the tab is fully disengaged from the port.
16
Oracle ZFS Storage Appliance Installation Guide • January 2014 E48491–02
EEE Terminology
10GBASE-T
Speed LED Color
Green
Transfer Rate
10000 Mbits/sec
Advertisement
Table of Contents
