Table of Contents
Advertisement
DE2 24P
Carefully slide the shelf into the rails until it is fully seated within the cabinet. The spotter, using
5
a flashlight, should ensure that the shelf is fully seated within the rails. If removing the shelf to
reseat it, support it at all times.
Install one long patchlock screw per rail to secure the rear of the shelf to the rear of the rack. If
6
the screw cannot be inserted, the shelf might not be fully seated within the rails.
Remove the front side caps, install one screw into each front side, and replace the caps.
7
Connect and apply power to the disk shelf as described in the next section.
8
▼
Powering On the Disk Shelf
Ensure you have met the following electrical safety measures before applying power to the disk
shelf:
130
Oracle ZFS Storage Appliance Installation Guide • January 2014 E48491–02
Advertisement
Table of Contents
