Overview; Precautions; Prerequisites - Oracle ZFS Installation Manual

Storage appliance
Hide thumbs Also See for ZFS:
Table of Contents

Advertisement

Overview

Overview

Precautions

Observe the following cautions when installing any Oracle ZFS Storage controller or cabinet.
Always load equipment into a rack from the bottom up so that it will not become top-heavy
and tip over. Deploy the anti-tip bar to the prevent the rack from tipping during equipment
installation.
Ensure that the temperature in the rack does not exceed the controller's maximum ambient
rated temperatures. Consider the total airflow requirements of all equipment installed in the
rack to ensure that the equipment is operated within its specified temperature range.
For best results, only qualified Oracle service personnel should perform cluster installation
and configuration. Contact Oracle Service for assistance.

Prerequisites

Refer to the Quick Setup poster that shipped with the product or the following hardware service
sections for an overview of your system controller or cabinet.
For controller installation, check that your rack is compatible with the slide rail and cable
management assembly options as follows:
The structure is a four-post rack with mounting at both front and back. Two-post racks are
not compatible.
The horizontal opening and unit vertical pitch conforms to ANSI/EIA 310-D-1992 or IEC
60927 standards.
The distance between the front and back mounting planes is between 24 in and 36 in (610
mm to 915 mm).
The distance to the front cabinet door, providing clearance depth in front of the front
mounting plane, is at least 1 in (25.4 mm).
The distance to the back cabinet door, providing clearance depth behind the front mounting
plane, is at least 31.5 in (800 mm) with the cable management assembly, or 27.5 in (700 mm)
without the cable management assembly.
80
Oracle ZFS Storage Appliance Installation Guide • January 2014 E48491–02
ZS3-2 Overview
- view component diagrams and specifications
ZS3-4 Overview
- view component diagrams and specifications
7120 Overview
- view component diagrams and specifications
7320 Overview
- view component diagrams and specifications, and cluster options
7420 Overview
- view component diagrams, specifications, and cluster options

Advertisement

Table of Contents
loading

Table of Contents