Table of Contents
Advertisement
Serial Management Connector
The serial management connector (SER MGT) is an RJ-45 port and provides a terminal
connection to the service processor (SP) console.
Network Management Connector
The network management connector (NET MGT) is an RJ-45 port and provides an alternate
terminal interface to the SP console.
Ethernet Ports
The ZS3-2 has four RJ-45 10-Gigabit Ethernet (10GbE) network connectors, labeled NET 3,
NET 2, NET 1, and NET 0 (left to right) on the rear panel. The ports operate at 100 Mbits/sec,
1000 Mbits/sec, or 10-Gbits/sec. Use these ports to connect the appliance to the network.
The LEDs located above each NET port are Link/Activity (left) and Speed (right) indicators for
each port as described in this table:
Connection Type
EEE Terminology
Fast Ethernet
100BASE-TX
Gigabit Ethernet
1000BASE-T
Chapter 1 • Introduction
Speed LED Color
Off
Amber
ZS3-2
Transfer Rate
100 Mbits/sec
1000 Mbits/sec
15
Advertisement
Table of Contents
