Table of Contents
Advertisement
DE2 24C
If using an unthreaded universal 19-inch or Sun Rack II cabinet, snap one supplied cage nut into
2
the 8th rack hole, counting upward, in each front rail of the 4RU space.
Prepare the screws in each rail end:
3
- Square-hole unthreaded cabinet: No preparation.
- Round-hole unthreaded cabinet: Remove the screws from each rail end and discard. Locate
the screws for round-hole cabinets and place aside.
- Threaded cabinet: Remove screws and replace them in the opposite direction (from the
inside of the rail flange) so they act as location pins. Also remove the clip nut from each front
rail end and discard.
Position the front of the rails inside the cabinet, with the rail flange inside of the cabinet flange,
4
and the rail label facing the inside of the cabinet.
- Square-hole unthreaded cabinet: The screw heads fit inside the rack holes.
120
Oracle ZFS Storage Appliance Installation Guide • January 2014 E48491–02
Advertisement
Table of Contents
