Setting Up Macintosh Printing - Toshiba GL-1010 Administrator's Manual

9

Setting Up Macintosh Printing

Printing to the controller from a Macintosh workstation involves the
following steps:
Enabling Macintosh printing from the copier control panel or using
TopAccess.
Installing the TOSHIBA LPD driver file on the client workstation.
This chapter describes how to set the necessary protocol and services
properties on the controller to support Macintosh printing. Refer to
Installing Macintosh PPD Files
installing and configuring the MAC driver on users' workstations.
GL-10x0 Administrator's Guide
on page 234 for instructions on
223