Toshiba GL-1010 Administrator's Manual page 345

Message
Scan kit Internal Error (SK5)
Scan Kit Internal Error (SK6)
Scanner Memory full. Job is
cancelled.
Select either Public or Private Scan.
Private scan may require a
password. Internal memory used is
NN%.
Select either Public or Private Scan.
Private scan may require a
password. Shared memory used is
NN%.
GL-10x0 Administrator's Guide
Scan-Related LCD Messages
Controller/copier interface issues. Restart both the
controller and the copier. If the controller is not
restored after restarting, recover the HDD. Refer to the
Operator's Guide. If the controller is still not restored,
contact your TOSHIBA authorized dealer for support.
Scanning cannot be started due to the copier status,
such as a misfeed in the document feeder or the
feeder may be open. Make sure that the operation on
the copier is set up properly and then try rescanning.
Scanner memory is full and your request has not been
accepted. Use TopAccess to confirm the job is in
process. When all jobs have been completed, delete
them from the queue. If the error persists, restart the
controller. If this does not resolve the error, contact
your TOSHIBA authorized dealer for support.
Verify that there are no active users. Run [SCAN] –
[A
DMINISTRATION
(administrator mode) and delete the Data Processing
folder. Refer to the TopAccess Online help or the
TopAccess chapter of the Administrator's Guide. If the
controller is not restored, contact your TOSHIBA
authorized dealer for support.
Verify that there are no active users. Run [SCAN] –
[A
DMINISTRATION
(administrator mode) and delete the Shared File folder
or TWAIN Data folder. Refer to the TopAccess Online
help or the TopAccess chapter of the Administrator's
Guide. If the controller is not restored, contact your
TOSHIBA authorized dealer for support.
Corrective Action
] – [D F ] on TopAccess
ELETE ILES
] – [D F ] on TopAccess
ELETE ILES
323