Configuring Network Protocol Properties - Toshiba GL-1010 Administrator's Manual
Toshiba gl-1010 office mfp
Hide thumbs
Also See for GL-1010:
- Operator's manual (126 pages) ,
- Network fax manual (98 pages) ,
- Network fax operators manual (88 pages)
Table of Contents
Advertisement
Setting iFax Output
You can control the output of the iFax in two ways. You can select duplex
output and you can select which tray the document prints from.
1
Log in as an administrator.
2
Click the
3
On the
4
Under iFax Output, click the
5
Select
6
Under iFax Output, click the
7
Select
8
Scroll down to the end of the page and click
Creating Custom Tabbed Paper Settings
You can create custom tabbed paper settings that will show up in the
printer driver. This feature is only supported on the GL-1020 controller.
1
Log in as an administrator.
2
Click the
3
On the
4
Under Tabbed Paper Settings, click
Settings dialog box opens.
5
Enter a
6
Select the Paper Size from the pull-down list. The options are:
1/2 x 11)
7
Enter the
8
Enter values for the
in the corresponding text boxes. Limits are provided onscreen.
9
Select the
10 Click
terminate the process.
Configuring Network Protocol Properties
The
Administration > Setup > Network
the client workstation to communicate with the controller. You must
configure the controller before end users can print over the network.
Administrator's Guide
GL-10x0
tab.
Administration
subtab, click
Device
or
.
Enable
Disable
or
.
Tray 1
Tray 2
tab.
Administration
subtab, click
Device
in the text box.
Tab Paper Name
and
.
A4
Number of Tabs per Bank
Top Margin
from the pull-down list. The options are
Units
to create the custom tabbed paper settings or
Save
. The Print Settings page opens.
Printer
drop-down menu.
Duplex
drop-down menu.
Tray
. The Print Settings page opens.
Printer
Custom Tab
in the text box.
,
,
Tab Length
Tab Distance
page lets you set up the protocols used by
.
Save
. The Custom Tab
, and
Tab Extension
and
inches
Cancel
Letter (8
.
mm
to
113
Advertisement
Table of Contents
Troubleshooting
