Setting Up Macintosh Printing - Toshiba GL-1020 Administrator's Manual

8

SETTING UP MACINTOSH PRINTING

GL-1020 Administrator's Guide
Printing to the GL-1020 controller from a Macintosh workstation
involves the following steps:
Enabling Macintosh printing from the copier's control panel or
by using TopAccess.
Installing the TOSHIBA LPD driver file on the client
workstation.
This chapter describes how to set the necessary protocol and
services properties on the GL-1020 controller to support Macintosh
printing. Refer to Installing Macintosh PPD Files
instructions on installing and configuring the MAC driver on users'
workstations.
on page 172 for
157