Originals And Paper; Acceptable Size Of Paper; Default Setting For Rx Printing - Toshiba e-studio 2802af Fax Manual

Hide thumbs Also See for e-studio 2802af:
Table of Contents

Advertisement

Originals and Paper

 Acceptable size of paper
LD, LG, LT, LT-R, ST-R, COMP, A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, 8K, 16K, and
16K-R size paper can be used.
Acceptable sizes of paper are different between e-STUDIO2802AF and e-STUDIO2809A
Series. See the following page for details.
 P.123 "Specifications of Fax"
The printing range of each size of paper is as follows: As shown in the figures below, if an
original document contains any information in the shaded area, it is not printed on the paper.
4 mm
(0.16 inch)
 The paper set on the bypass tray cannot be used.
 A drawer exclusive for fax can be set. See the following page for details.
 P.54 "Setting a Fax drawer"
 Default setting for RX printing
To print the received fax, the paper with the same width as the original is used. Depending on
the length of the original, "RXPRINT - REDUCTION" or "RXPRINT - DISCARD" (both of them
are set to ON by manufacturer default) are applied.
This function operates based on the settings made by the administrator, and as such no user
operations may be necessary. For details of the setting operation, see the following page.
 P.102 "FAX"
When an original is shorter or the same as the paper printing area
It is printed in the original size.
When an original is longer than the paper printing area
It is printed according to the following priority:
 When an original is up to 10 mm (0.4 inch) longer than the printing area: the part of the
original that exceeds the paper printing area is discarded.
 When an original exceeds the printing area by more than 10 mm (0.4 inch), the original
image is reduced by one size for printing (reduction printing). If the image still cannot be
fitted into the printing area, paper larger than the original is selected. In case there is no
larger paper available, the original is printed with the image divided.
4 mm
(0.16 inch)
4 mm
(0.16 inch)
4 mm
(0.16 inch)
4 mm
(0.16 inch)
4 mm
(0.16 inch)
4 mm
4 mm
(0.16 inch)
(0.16 inch)

Originals and Paper

3 RECEIVING A FAX
51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio 2309aE-studio 2809a

Table of Contents