Toshiba GL-1010 Administrator's Manual page 148

5 Select
Disable
6 Select
list. Different fields are displayed for each operating mode. The
default mode is
7 Select the
8 Enter the
9 Enter the
10 Enter the
NetWare environment that includes 4.x bindery emulation.)
11 Enter the
environment that includes 4.x/5.x/6.x).
12 Enter the
environment that includes 4.x/5.x/6.x).
13 Enter a
14 Click
Configuring Microsoft Printing
Microsoft Print Services are enabled by default.
1 Log in as an administrator.
2 On the Administration tab, click the
3 Click the
4 In the Microsoft Printing area, click the
5 Select
6 Select
dssc
7 Click
Configuring LPD Printing
LPD Print Services are enabled by default.
1 Log in as an administrator.
2 On the Administration tab, click the
3 Click the
4 In the LPD Printing area, click the
126
to enable Novell Print Services. The default setting is
Enable
.
or
Print Server Network Printer
Print Server
NetWare Environment
Advertised Name
Print Server Name
Primary File Server Name
. (Needed for a print server in a NetWare
Context Name
. (Needed for a print server in a NetWare
Tree Name
.
Printer Number
.
Save
Print Services
or .
Enable Disable
Disable access to GL_PCL6
to disable access to these print devices.
.
Save
Print Services
from the
.
from the drop-down list.
. (Network Printer only.)
, if applicable.
. (Needed for a print server in a
Setup
link. The Print Services page opens.
Service
,
Disable access to GL_PS2
Setup
link. The Print Services page opens.
Service
GL-10x0
drop-down
Operating Mode
subtab.
drop-down list.
, or
Disable access to
subtab.
drop-down list.
Administrator's Guide