Toshiba GL-1010 Administrator's Manual page 294

Viewing the Scan Message Log
To view the list of system messages for scan jobs:
1 On the Scan Jobs page, click
2 To sort the list of messages in a particular order, click the appropriate
table heading.
3 Scroll down the list to locate the messages.
Deleting Scan Jobs
You can cancel any job that is in the Current Jobs queue by deleting it.
1 On the Current Jobs page, check the box next to the scan job that
you want to delete or click the
2 Click
3 Click
from the queue.
Scan Administration
It is a good idea to perform regular maintenance tasks such as resetting
the scan counter, backing up and restoring the address book and scan
templates, or deleting scan files stored on the controller.
For information about how to reset scan counters, see
Counters
For backing up, restoring, and deleting files, refer to
System
Enabling and Disabling the Scan Function
You can disable the scan function for security reasons. You can also
enable the scan function should the security risk that caused you to
disable the scan function be resolved.
To enable or disable the scan function:
1 Log in as an administrator.
2 Click the Administration tab.
3 Click the Device subtab. The Device page opens.
4 Click the
5 Under Options, click the down arrow on the
272
.
Delete
to confirm the deletion process. The scan job(s) are deleted
OK
on page 193.
on page 275.
link.
General
Message Log.
heading to select all jobs.
Check All
Scan
GL-10x0 Administrator's Guide
Resetting Scan
Maintaining the
pull-down list box.