Toshiba GL-1010 Administrator's Manual page 216

Option Value
dorientation= <value>
dformlines= <value>
dsymbolset= <value>
dfactorydefault= <value> Set the factory default settings for pitch, point size, orientation,
When dfactorydefault=on, only this option is sent to the printer which
reverts to the factory defaults. When other options are set
(dfactorydefault is off or not set), then those options are sent to the
printer.
If the option values specified are outside the indicated limits for dpitch,
dpointsize, dorientation, dformlines, and dsymbolset, then their
respective default values are used.
Example: The command to set the default factory pitch to 10 is lp –o
dpitch=10 <filename>.
Orientation
The following orientation options are available.
Option Value
portrait
landscape
If this option is not specified, the default value is used.
Example: The command to specify landscape orientation is lp –o
landscape
194
Factory Default Setting Options
Description
Set the orientation to <value>.
0 – Portrait orientation is used.
1 – Landscape orientation is used.
The default is 0.
Set the number of form lines to <value>. The range available is
to . The default is
128.00
Set the symbol set to <value>. The range available is
default is (PC-8).
341
formlines, and symbolset.
OFF or off: <value>=0. Factory default settings are not used.
ON or on: <value>=1. Factory default settings are used.
Orientation Options
Description
Prints the document in portrait orientation.
Prints the document in landscape orientation.
<filename>.
.
12.00
GL-10x0 Administrator's Guide
5.00
to . The
1 999