Toshiba GL-1010 Administrator's Manual page 207

Option
Value Description
staple=7 Put 2 staples on the top side of a portrait page or the right side of a
landscape page printed on short-edge-feed large format (A3/Ledger) paper.
This command has no affect on long-edge-feed paper or small paper sizes.
staple=8 Put 2 staples on the bottom side of a portrait page or the left side of a
landscape page printed on short-edge-feed large format (A3/Ledger) paper.
This command has no affect on long-edge-feed paper or small paper sizes.
staple=9 Put 2 staples in the middle of a landscape page and fold the paper in half
vertically along the staple line (saddle stitching). This command works in
conjunction with booklet printing. This command has no affect on long-
edge-feed paper.
If this option is not specified, the printer default value is used.
Example: The command to staple in the upper left corner of a long edge
feed portrait page is lp –o staple=1
The value for the stapling position depends on the paper size, the paper
feed direction, and the print direction. This function is not available for
all paper sizes and users should refer to the copier manual for a list of
compatible paper sizes. In particular, A5, A6, and statement paper sizes
do not support this function.
Output Bin
Specify the output bin using the following options.
If this option is not specified, the default output tray is used (bin 2).
Example: The command to specify output bin 1 is lp –o bin1
<filename>.
GL-10x0 Administrator's Guide
Stapling Options
Output Tray Options
Option Value
bin1
bin2
<filename>.
Description
Selects the upper output tray.
Selects the lower output tray.
185