Toshiba GL-1010 Administrator's Manual page 131

4 Under
Edit
5 The Edit or Add dialog box opens.
6 Click the drop-down menus to set these raw job options:
Note: Any new queue you create must be an LPR queue. Also, you
cannot delete the built-in queues.
Note: If you select both the paper size and the paper type from the
pull-down lists, make sure that paper of the correct type and size is in
the appropriate source.
Administrator's Guide
GL-10x0
, either select an existing queue name and click
Raw Job Settings
to modify an existing queue or click
Queue Name: If you are creating a new queue, enter the queue
name in the text field.
Duplex Printing:
by selecting the appropriate value in this pull-down list.
Paper Size: Use this pull-down list to select the desired paper
size from among:
, , , ,
A5 B4 B5 Folio 13-inch Legal
Paper Type: Use this pull-down list to select the desired paper
type from among:
, and .
Insert Special
Orientation: Use this pull-down list to select the printing
orientation. The options are:
Stapling: Use this pull-down list to select the stapling option. The
options are: and
Off
Output Tray: Use this pull-down list to select the desired output
tray. The options are:
Points per Line: Use this numeric field to define the number of
points per line for the text. This value should include both the
space that the letters occupy (the Font Point Size) and any
interline space needed to make the lines distinct. See the note
below for additional information regarding point size and the use
of points per line, font pitch, and font point size.
PCL Font Pitch: Use this numeric field to define the font pitch
for the text. Font Pitch defines the number of characters that will
fit into an inch of line length. Font Pitch is only valid when using
a fixed pitch or non-proportional font in which each character
takes up the same space on the line as any other character. See
the note below for additional information regarding point size and
the use of points per line, font pitch, and font point size.
PCL Font Point Size: Use this numeric field to adjust the point
size or height of the letters on the line. The font size is measured
or duplex printing for the raw job
Disable Enable
, ,
Ledger Legal Letter
,
8.5-inch square
, ,
Plain Transparency
Portrait
.
On
and
Tray 1 Tray 2
to create a new queue.
Add
, ,
COMPUTER Statement
, , and
8K 16K
, ,
Tab Paper Thick 1 Thick 2
and .
Landscape
.
, , ,
A3 A4
.
, ,
Cover
109