Lpr/Lpd Printing; Ipp Printing - Toshiba GL-1010 Administrator's Manual

LPR/LPD Printing

Considerations and Limitations
You must add and configure Microsoft TCP/IP printing services from
the Network folder in the Windows Control Panel before you can add
an LPR printer port (Windows NT, Windows 2000, and Windows XP
only).
To print a file using the LPR command line, the file must be in an
encapsulated print format or a standard text file.
Prerequisites
1 Install Microsoft TCP/IP Printing Services.
2 Add an LPR port.
Configuring Microsoft LPD Printing
1 Launch your Web browser.
2 Open TopAccess using the IP address of the controller you want to
configure. (Refer to
Note: You can find the IP address through TopAccessDocMon.
3 Login as an Administrator.
4 Click the Administration tab.
5 Click the Setup submenu.
6 Click the
7 In the
8 Scroll down to the bottom of the page and click
Proceed to
All these procedures are described in detail in the Operator's Guide.

IPP Printing

Considerations and Limitations
If you configure the controller as an IPP-compatible printer, end-users
can print to the device over the Internet. IPP printing is available only over
TCP/IP.
Administrator's Guide
GL-10x0
Opening TopAccess
Print Services
text box, select
LPD Printing
Installing Client Software
on page 72.)
link.
from the drop-down list.
Enable
on page 229.
.
Save
175