Toshiba GL-1010 Administrator's Manual page 380

Corrective Action
Use Novell's AppleTalk Print Services utility from the Novell console to
modify the configuration options of the spooler used to queue Macintosh
jobs to the controller.
1 From the Configuration Options dialog box, choose
2 Select the queue created to direct print jobs to the controller.
3 Choose the
4 Select
5 For the
6 Save the changes.
For more information about using Novell utilities, please refer to your
Novell user documentation.
Booklet Prints on Wrong Size Paper
Problem Description
This problem results from conflicting application and driver settings. For
example, Microsoft Word supports booklet printing from within the
application. Set the Booklet page size in the Page Setup dialog box.
However, if you set booklet properties from the printer driver, you must
set the corresponding paper size from the Word Page Setup dialog box as
well, or the document will print on the page size specified in the
application, regardless of the driver settings.
For applications that do not support booklet printing, such as Netscape,
you must specify settings such as page size and print mode from the
driver.
Corrective Action
Remember that application settings almost always override driver
settings. As a general rule, set the application properties to achieve the
desired effect. Set driver properties only for those features the application
does not support.
358
Spooler Parameters
Advanced PostScript Options
Accept Binary Data
option.
and press
value choose .
No
GL-10x0 Administrator's Guide
Configure Spoolers
.
Enter
.