Naming The Device And Workgroup - Toshiba GL-1010 Administrator's Manual
Toshiba gl-1010 office mfp
Hide thumbs
Also See for GL-1010:
- Operator's manual (126 pages) ,
- Network fax manual (98 pages) ,
- Network fax operators manual (88 pages)
Table of Contents
Advertisement
2
By default, Macintosh printing is enabled. If it has been disabled,
press
3
Press
4
Enter the AppleTalk name. The name is the same as the Microsoft
computer name (device name).
By default, the device name is GL<MAC Address>, where <MAC
Address> is the media access control number of the NIC installed in
the controller. For example, GL00DOC9165206. You can specify a
different name of up to 32 alphanumeric characters, provided it is
unique within your network.
5
Press
6
Enter the AppleTalk Zone, which is "*" by default. This indicates the
local zone, although you can specify a different name of up to 32
alphanumeric characters.
7
Press
Naming the Device and Workgroup
1
From the Admin menu, press N
Setting screen.
32
to establish Macintosh print services.
ENABLE
to display the touch keyboard.
APPLETALK NAME
to display the touch keyboard.
DESIRED ZONE
to save your changes.
OK
Device Setting Screen
to open the Network
ETWORK SETTING
GL-10x0 Administrator's Guide
Advertisement
Table of Contents
Troubleshooting
