Toshiba GL-1010 Administrator's Manual page 66

3 Press
4 Press
the LCD touch screen displays first Shut-down in progress and
then Starting Controller. Please wait. When the controller
comes back online, you can resume network and printing functions.
Alternate Reboot Procedure
Warning! Do NOT reboot the controller using this method unless
absolutely necessary. Any job currently being processed is lost during
the reboot process.
If you cannot reboot using the preferred procedure:
1 Press
seconds
2 Press
Shutting Down the Controller
Gracefully powering down the TOSHIBA Network Document Processing
System begins with shutting down the controller from the copier control
panel. After you shut down the controller, you can safely power off the
copier.
Caution! Do NOT power off the controller by pressing the controller
power switch because this may damage the controller hard drive or
corrupt the software.
Power down the controller from the copier LCD touch screen, using the
S D
HUT
1 Press
2 Press the
3 Press
4 Press
To restart the controller, turn on the power switch.
44
. A confirmation message appears.
REBOOT
to proceed. The controller goes offline while rebooting and
YES
PRINTER/NETWORK, AND
.
. The controller reboots.
START
function.
OWN
PRINTER/NETWORK
tab. The main Print menu opens.
PRINT
. TopAccess prompts you to confirm your request.
SHUTDOWN
to proceed.
YES
hold down the button for at least 10
.
GL-10x0 Administrator's Guide