Toshiba GL-1010 Administrator's Manual page 125

Setting the Auto Power Save Feature
Auto Power Save
entering its power saving mode.
1 Log in as an administrator.
2 Click the
3 Click the
4 Click the
5 In the Copier Settings page, click the
6 Select either
the copier is inactive for the selected time, it enters power saving
mode.
7 Click
When you have finished setting copier attributes, you must turn the
copier off and then back on to apply your changes.
Setting Up Automatic Power Off
Automatic Shutdown
shuts down.
1 Log in as an administrator.
2 Click the
3 Click the
4 Click the
5 In the Copier Settings window, click the
menu.
6 Select either
it remains inactive for the time specified, the copier turns itself off.
7 Click
When you have finished setting copier attributes, you must turn the
copier off and then back on to apply your changes.
Setting the Maximum Number of Copies
The
Maximum Copies
can be made during a single copy job. Note that you may need to clear the
output tray if the number of pages copied exceeds the tray capacity.
1 Log in as an administrator.
Administrator's Guide
GL-10x0
specifies how long the copier can remain inactive before
tab.
Administration
subtab.
Device
subtab.
Copier
or a time interval between
Disabled
.
Save
defines the period of inactivity after which the copier
tab.
Administration
subtab.
Device
subtab.
Copier
or a time interval between
Disabled
.
Save
feature specifies the maximum number of copies that
drop-down menu.
Auto Power Save
and
15 60
drop-down
Auto Power Off
and
25 240
minutes. If
minutes. If
103