Managing Unix Print Queues - Toshiba GL-1010 Administrator's Manual

If you receive any other output, the filters will not work. Contact your
system administrator to correct the operating system name.
4 Change to the root directory.
5 Depending on the operating system, enter the appropriate command:
The command extracts all the required files and installs them in the
correct locations.

Managing Unix Print Queues

Considerations and Limitations
You must have root privileges to create a print queue.
Prerequisites
Locate the controller IP address to access the device through its IP
address.
Alternatively, add the device host name to the /etc/hosts file using
the admintool command for Solaris or IBM AIX, the sam command
for HP-UX, or the linuxconf command for Linux.
Unix Queue Setup
Creating a Print Queue
1 Log on to the root account.
2 Enter the following command:
gl10X0add <queue name> <host name or IP address>
180
Linux: uname -a
Expected output: LinuxOS
Open Unix: uname -a
Expected output: OpenUNIX
Solaris: tar xvf solaris106.tar
HP-UX: tar xvf hpux106.tar
IBM AIX: tar xvf aix106.tar
Linux: tar xvf linux106.tar
Open Unix: tar xvf openunix106.tar
GL-10x0 Administrator's Guide