Toshiba GL-1010 Administrator's Manual page 323

Resolving Network Connectivity and Printing Issues (Continued)
Network
Configuration
Unix Environment
• TCP/IP Protocol
• Microsoft Peer-to-
Peer networking
• Clients running on
HP, Sun, AIX, or
Linux platforms
GL-10x0 Administrator's Guide
Check...
1 Is TCP/IP set up on the
controller?
2 Did you successfully
install the TOSHIBA
Unix filters?
3 Did you successfully
create and set up the
controller print queue?
4 Can you print to the
controller using LPD as
root?
5 Can you ping the
controller from your
workstation?
6 Is the LP Daemon
functioning?
7 Again, check the
controller IP address
and recreate print
services. Check for
problems or conflicts in
the /etc/hosts file.
For Instructions,
Yes No
Configuring TCP/IP
Next
Protocol Settings
Step
page 28.
TAR File Setup
Next
Step page 179.
Unix Queue Setup
Next
Step page 180.
Next Set up Unix access for
Step the controller to enable
other users to print from
the Bourne shell. Refer
to your Unix
documentation for more
information.
Next Try remote ping from
Step another server. If you
can reach the controller
from that server, check
for conflicts between the
controller and your
current network
segment.
Next Reload Daemon or
Step restart the system.
End Contact your TOSHIBA
authorized dealer for
support.
Go To...
on
on
on
301