Setting Up Appletalk Printing - Toshiba GL-1010 Administrator's Manual
Toshiba gl-1010 office mfp
Hide thumbs
Also See for GL-1010:
- Operator's manual (126 pages) ,
- Network fax manual (98 pages) ,
- Network fax operators manual (88 pages)
Table of Contents
Advertisement
Setting Up AppleTalk Printing
Considerations and Limitations
The controller supports Macintosh printing over EtherTalk only.
TokenTalk is not supported.
Magazine sorting and saddle stitching features are not supported.
Printing Microsoft Word documents that contain multiple section
breaks is not supported. The output stacking order is incorrect and, if
stapling is enabled, each section is stapled individually.
Prerequisites
Macintosh
You can enable Macintosh printing remotely, by using TopAccess on
the administrator's workstation, or locally, using the copier LCD
touch screen.
Configuring AppleTalk
Set Protocol
1
Launch your Web browser. Open TopAccess using the IP address of
the controller you want to configure. (Refer to
page 72.)
Note: You can find the IP address using TopAccessDocMon.
2
Login as an Administrator.
3
Click the Administration tab.
4
Click the Setup submenu.
224
Operating System version 9.2.2+, or OS 10.2.6+
LaserWriter 8.6.5+ printer driver
Opening TopAccess
GL-10x0 Administrator's Guide
on
Advertisement
Table of Contents
Troubleshooting
