Configuring The User Interfaces For Ssh Clients - 3Com 4500 PWR 26-Port Configuration Manual

Complete the following tasks to configure the SSH server:
Preparation
Key
Authentication
Authorization
Data exchange
Note:
T he SSH server needs to
SSH client configuration, refer to

Configuring the User Interfaces for SSH Clients

An SSH client will access the device through a terminal "VTY" user
c onfigure the device user interface to accept SSH clients and allow SSH login. Note that the
config uration takes effect at the next login.
Follo w these steps to configure the device user interface for SSH clients:
To do...
Enter system view
En ter user interface view of o
o more user interfaces r
Co nfigure the authentication
mo de as scheme
Task
Configuring the User Interfaces for
SSH Clients
Configuring the SSH Management
Functions
Configuring Key Pairs
Creating an SSH User and Specifying
an Authentication Type
Specifying a Service Type for an SSH
User on the Server
Configuring the Public Key of a Client
on the Server
Assigning a Public Key to an SSH
User
Exporting the Host Publi
cooperat e with an SSH cl
Configuring the SSH Client
Use the command...
system-view
ne user-interface vty first-number
[ last-number ]
authentication-mode scheme
[ command-authorization ]
Required
Optional
Required
Required
Optional
By default, an SSH user can use the
service type of stelnet.
Not
authentication mode is password.
Required when the authentication
mode is publickey.
Not
authentication mode is password.
Required when the authentication
mode is publickey.
Optional
If a client does not support first-time
c Key to a File
authentication, you need to export the
server's public ke
key on the client.
ient to complete the interactions between them. For
.
Remarks
necessary when
necessary when
y and configure the
interface. Therefore, you need to
Remarks
—
—
Required
By default, the user interface
authentication mode
password.
the
the
is