2)
Establish a cluster in automatic mode
Follow these steps to establish a cluster in automatic mode:
To do...
Enter system view
Enter cluster view
Configure the IP address range
for the cluster
Start automatic cluster
establishment
After a cluster is established automatically, ACL 3998 and ACL 3999 will be generated
automatically.
After a cluster is established automatically, ACL 3998 and ACL 3999 can neither be modified nor
removed.
Configuring inside-outside interaction for a cluster
Follow these steps to configure inside-outside interaction for a cluster:
To do...
Enter system view
Enter cluster view
Configure a shared FTP server
for the cluster
Configure a shared TFTP
server for the cluster
Configure a shared logging
host for the cluster
Configure a shared SNMP host
for the cluster
Configuring the network management interface for a cluster
1)
Configuration prerequisites
Use the command...
system-view
cluster
ip-pool
administrator-ip-address {
ip-mask | ip-mask-length }
auto-build [ recover ]
Use the command...
system-view
cluster
ftp-server ip-address
tftp-server ip-address
logging-host ip-address
snmp-host ip-address
48-13
Remarks
—
—
Required
Required
Follow prompts to establish a
cluster.
Remarks
—
Required
Optional
By default, the management
device acts as the shared FTP
server.
Optional
By default, no shared TFTP
server is configured.
Optional
By default, no shared logging
host is configured.
Optional
By default, no shared SNMP
host is configured.