Displaying and maintaining IPv6 Telnet
To do...
Display the use information of
the users who h
IPv6
Application Configuration Example
IPv6
Applications
Network requirements
In
Figure
69-3, SWA, SWB, and SWC are three switches, among which SWA is a 3com switch 4500,
SWB and SWC are two switches supporting IPv6
TFTP server for providing Telnet service and
you telnet to the telnet server from SWA and do
Network diagram
Figure 69-3 Network diagram for IPv6 applic
C onfiguration procedure
You need configure IPv6 address at the switch's and server's interfaces and ensure that the route
between the switch and the server is accessible before the followi
# Ping SWB's IPv6 address from SWA.
<SWA> ping ipv6 3003::1
PING 3003::1 : 64
Reply from 3003::1
bytes=56 Sequence=1
Reply from 3003::1
Use the command...
display users [ all ]
ave logged in
dat
a bytes, press CTRL_C to break
hop limit=64
forwarding. In a LAN, there is a Telnet server and a
TFTP service to the switch respectively. It is required that
wnload files from the TFTP server.
ations
ng configuration.
time = 110 ms
69-4
Remarks
Available in any view