Basic System Configuration And Debugging - 3Com 4500 PWR 26-Port Configuration Manual

61

Basic System Configuration and Debugging

Wh n configuring basic system c e
are interested in:
Basic System Configura
Displaying the System Status
Debugging the System
Bas ic System Configuration
Perform the f ollowi
To do...
Set the current date
and time of the
system
Set the local time
zone
Set the name and
time range of the
summer time
Enter system view
from user view
Set the system
name of the switch
Return from current
view to lower level
view
Return from current
view to user view
onfiguration and debugging, go to these sections for information you
tion
ng basic system configuration:
Use the command...
clock datetime
HH:MM:SS
{ YYYY/MM/DD |
MM/DD/YYYY }
clock timezo ne
zone-name { add | minus }
HH:MM:SS
clock summer-time
zone_name { one-off
repeating } start-time
start-date end-time
end-date offset-time
system-view
sysname sysname
quit
return
Required
Execute this command
The defau lt value is 23:55:00 04/01/2000 when
the system starts up.
Optional
Execute t his command in user view.
By default, it is the UTC time zone.
Optional
Ex ecute this command in user view.
When the system reaches the specified
start time, it automatically adds the
|
specified offset to the current time, so as to
toggle the system time to the summer time.
When the system reaches the specified end
time, it automatically subtracts the specified
offset from the curre
the summer time to normal system time.
—
Optional
By default, the name is 4500.
Optional
If the curre nt view is user view, you will quit the
current user interface.
Optional
The composite key <Ctrl+Z> has the same
effect with the return command.
61-1
Remarks
in user view.
nt time, so as to toggle