Adding A Static Mac Address Entry Manually - 3Com 4500 PWR 26-Port Configuration Manual

Configuration Example

Adding a Static MAC Address Entry Manually

Network requirements
The server connects to the switch through Ethernet 1/0/2. To prevent the switch from broadcasting
packets destined for the server, it is required to add the MAC address of the server to the MAC address
table of the switch, which then forwards packets destined for the server through Ethernet 1/0/2.
The MAC address of the server is 000f-e20f-dc71.
Port Ethernet 1/0/2 belongs to VLAN 1.
Configuration procedure
# Enter system view.
<Sysname> system-view
[Sysname]
# Add a MAC address, with the VLAN, ports, and states specified.
[Sysname] mac-address static 000f-e20f-dc71 interface Ethernet 1/0/2 vlan 1
# Display information about the current MAC address table.
[Sysname] display mac-address interface Ethernet 1/0/2
MAC ADDR
000f-e20f-dc71
000f-e20f-a7d6
000f-e20f-b1fb
000f-e20f-f116
--- 4 mac address(es) found on port Ethernet1/0/2 ---
VLAN ID STATE
1 Config static
1 Learned
1 Learned
1 Learned
PORT INDEX
Ethernet1/0/2
Ethernet1/0/2
Ethernet1/0/2
Ethernet1/0/2
18-8
AGING TIME(s)
NOAGED
AGING
AGING
AGING