Select File > Properties on the HyperTerminal window, and the Switch Properties window appears.
Select the Settings tab as shown in
then click OK.
Figure 1-6 Select the emulation terminal on the Switch Pro
Press Enter on the HyperTer
indicating that you have logged in to your switch successfully.
Entering CLI Through Telnet
After you log in to your switch through t
configure Telnet login as soon as possible, so that you can use a remote terminal to configure and
manage your switch.
Telnet login authentication methods
In order to restrict the login to your switch, 3Com provides three Telnet login authentication methods.
S
elect a proper me
Table 1-1 Telnet log
Authentication
method
None
Figure
minal window. Then the CLI of your switch appears on the window,
he console port for the first time, it is recommended that you
thod accordin
g to your netw
in authentication metho
Description
Easy to configure
Allows any user to telnet to your
switch
Least secure
1-6, select VT100
from the Emulation drop-down list, and
perties window
ork conditions.
ds
Lab environments
and extremely secure
network
environments
1-5
Application
Configuration
scenarios
For more
information,
see Login
Configuration.