3Com 4500 PWR 26-Port Configuration Manual page 752

Follow these steps to enable the system information display on the console:
To do...
Enable the debugging/log/trap
information terminal display function
Enable debugging information
terminal display function
Enable log information terminal
display function
Enable trap information terminal
display function
Make sure that the debugging/lo
t erminal monitor co
t he terminal debugging
Settin g to Output Syste
System information can also be output to a monitor terminal, whi
connections through the AUX, or VTY user interface.
Setting to output s
Follo w these step
To do...
Enter system view
Enable the information
center
Enable system
informatio n output to
Telnet termi nal or
dumb termina l
Co nfigure the output
rul es of system
inf ormation
Se t the format of time
stamp in the output
information
terminal monitor
terminal debugging
terminal logging
terminal trapping
g/trap information term
mma nd) before you
, terminal logging, or terminal trapping
m Information to a Monitor
yste m information to a monitor terminal
s to set to output system information to a
Use the command...
system-view
info-center enable
info-center monitor channel
{ channel-number | channel-name }
info-center source { modu-name |
default } channel { channel-number |
channel-name } [ { log | trap | debug }
{ level severity | state state } ]*
info-center timestamp
debugging } { boot | date | none }
Use the command...
inal display functio
enable the correspondin
Termin
monitor
{ log | trap |
59-10
Remarks
Optional
Enabled by default.
Optional
Disabled by default.
Optional
En abled by default.
Optional
Enabled by default.
n is enabl ed (use the
g ter minal display function by using
command .
al
ch is a user terminal tha
terminal:
Remarks
—
Optional
Enabled by default.
Optional
By default, a switch outputs
log/debugging/trap information to
a user terminal through
information channel 1.
Optional
Refer to Table 59-4 for the default
output rules of system
information.
Optional
By default, the time stamp format
of the log and trap output
information is date, and that of
the debugging output information
is boot.
t has login