Auto Detect Basic Configuration; Auto Detect Implementation In Static Routing - 3Com 4500 PWR 26-Port Configuration Manual

Auto Detect Implementation in VL

Auto Detect Basic Configuration

Follo w these steps to configure t
To do...
Enter system view
Create a detected group and
enter detected group view
Add an IP address to be
detected to the detected g
Specify a relationship between
detected IP addresses in the
group
Set an interval between
detecting operations
Set the number of ICMP
requests during a detecting
operation
Set a timeout waiting for an
ICMP reply
Display the detected group
configuration
If the relationship between IP addresses of a detected group is and, any unreachable IP address in the
group makes the detected group unreachable and the remaining IP addresses will not be detected. If
the relationship is or, any reachable IP address makes the detected group reachable and the remaining
IP addresses will no

Auto Detect Implementation in Static Routing

A static route is a special route. It is manually configured by the administrator. With a static route
configured, the data packets to the specified destination will be forwarded along the path specified by
the administrator.
The disadvantage of using static
or a topology change occurs to the network, the routes may be unreachable and the network may
break.
Task
AN Interface B
he auto detect function:
Use the command...
system-view
detect-group group-number
detect-list list-number ip
address ip-address
roup
[ nexthop ip-addre
option [ and | or ]
timer loop interval
retry retry-times
timer wait seconds
display detect-group
[ group-number ]
t be detected.
routes is that they cannot adapt to network topology changes. If a fault
ackup Optional
—
Required
Required
ss ]
Optional
By defaul
specified.
Optional
By default, the detectin
is 15 seconds.
Optional
By default, the number is 2.
Optional
By default, the timeout is 2
seconds.
Available in any view
19-2
Remarks
Remarks
t, the and keyword is
g interval