Configuring Radius Accounting Servers - 3Com 4500 PWR 26-Port Configuration Manual

Figure 33-1 Network diagram for the RADIUS authorization attribute ignoring functio
Follow these steps to configure the RADIUS authorization attribute ignoring function:
To do...
Enter system view
Create a RADIUS scheme and
enter its view
Configure the RADIUS
authorization attribute ignoring
function
In a RADIUS scheme, you can configure:
One standard attribute ignoring command
One proprietary attribute ignoring command per vendor
Up to three attribute ignoring commands in total

Configuring RADIUS Accounting Servers

Follow these steps to configure RADIUS accounting servers:
To do...
Enter system view
Create a RADIUS
scheme and enter its
view
Use the command...
system-view
radius scheme
radius-scheme-name
attribute-ignore { standard
| vendor vendor-id } type
type-value
Use the command...
system-view
radius scheme
radius-scheme-name
33-14
Remarks
—
Required
By default, a RADIUS scheme
named "system" has already been
created in the system.
Required
Disabled by default.
Remarks
—
Required
By default, a RADIUS scheme named
"system" has already been created in
the system.
n