3Com 4500 PWR 26-Port Configuration Manual page 808

Displ aying remote-ping Configuration
After the a bove remote
d isplay the information of rem
Table 67 -2 Display remote-pi
Operation
Display the information of
remote-ping test history
Display the latest remote-ping
test results
Rem ote-ping Configuration Example
Network requirement
Perform a remote-ping ICMP t
RTTs of data packets betw
C onfiguration procedure
# Enable remote-ping Client.
<Sysname> system-view
System View: return to User V
[Sysname] remote-ping-agent enable
# Create a remote-ping test group "administrator icmp".
[Sysname] remote-ping administrator icmp
# Specify the test type as ICMP.
[Sysname-remote-ping-administrator-icmp] test-type icmp
# Specify the destination IP address as 1.1.1.99.
[Sysname-remote-ping-administrator-icmp] destination-ip 1.1.1.99
# Set the number of test packets sent in a test to 10.
[Sysname-remote-ping-administrator-icmp] count 10
# Set the timeout time of test operations to 5.
[Sysname-remote-ping-administrator-icmp] timeout 5
# Enable the test operation.
[Sysname-remote-ping-administrator-icmp
# Display the test results.
[Sysname-remote-ping-administrator-icmp] displ
remote-ping entry(admin administrator,
Destination ip address:1.1.1.99
Send operati
Min/Max/Average Round Trip Time: 2/5/2
-ping configuration,
ote-p ing test operation status to you
ng co nfiguration
display remote
[ administrator-name
operation-tag ]
display remote-p
[ administrator-nam
operation-tag ]
est between two switches. Like a ping test, this test uses ICMP to test the
een the source and the destination.
iew with Ctrl+Z.
on times: 10
you can exe cute the display co
can verify the configuration effect.
Command
-ping history
ing results
e
] test-enable
ay remote-ping results administrator icmp
tag icmp) test result:
Receive response times: 10
67-3
mmand in an
Description
The display command can be
executed in any view.
y view to