Displaying PoE Profile Configuration
To do...
Display the detailed info
about the PoE profiles cre
on the switch
PoE Profile Configuration Example
PoE P f
ro ile Application Example
Netw
ork requirements
Switch A is a Switch 4500 supporting PoE.
Ethernet 1/0/1 through Ethernet 1/0/10 of Switch A are used by users of group A, who have the following
requirements:
The PoE function can be enabled on all ports in use.
Signal mode is used to supply power.
The PoE priority for Ethern
Ethernet 1/0/
The maximum power for Eth
maximum power for Ethernet 1/0/6 th
Based on the above requirements, two
Apply PoE profile 1 for Etherne
Apply PoE profile 2 for Ethernet
rmation
display poe-profile { all-profile |
ated
interface interface-type interface-number |
name pr
et 1/0/1 through Ethernet 1/0/5 is Critical, whereas the PoE priority for
6 through Ethernet 1/0/10 is High.
ernet 1/0/1 through Ethernet 1/0/5 ports is 3000 mW, whereas the
PoE profiles are made for users of group A.
t 1/0/1 through Ethernet 1/0/5;
1/0/6 through Ethernet 1/0/10.
Use the command...
ofile-name }
rough Ethernet 1/0/10 is 15400 mW.
50-3
Remarks
Available in any
view